How To Root HTC Explorer A310E( Pico )?

HTC Explorer is a great budget android phone. Equipped with a lot of candy features, not to mention the Sense 3.5 UI. If you want to select your first android touch phone and budget tight then,need not consider any other but the explorer itself. Superb first android phone.It is powered by a 600MHz processor ,Adreno 200 GPU, 3.2MP camera (no flash) and many more. So this cute little phone has a little bad side-a low 90MB linternal memory. it has some pre-installed apps that cannot be removed. How to remove them?

Rooting is the only way. Let's see how to root it. Its fast and simple-yet effective.

Warning:

Rooting makes your warranty void. This is simple guidelines created by experts. Mistake might be present. please be kind enough to report. Wrong doings can brick your phone!!!

Rooting:

Follow these steps carefully---

• First thing you have to do is install HTC sync on your PC 

It can be downloaded from HTC site. This will help to communicate between PC and Device

• Next you have to unlock your phone's bootloader 

 ( Go to htcdev.com. From Bootloader section select your device. But HTC explorer isnt listed on the site. No need to worry. Just select "All Supported Models", and follow the steps.)

• Now 'ADD A RECOVERY' - 

That will allow you to install .zip ROMs. You can access to it in the menu android phones have when booting the phone after removing-inserting the battery and pressing "volume down" and "power" buttons simultaneously. (Other phones have different button combinations).

1.  Download  this recovery file - HTCa310eRecovery.zip

2.  Extract all the files to any place on your PC like E:/explorer

3.  Run the recovery.bat with phone in fastboot mode (first option in the "3 android menu" ) and connected with USB.

If you have done all this correctly then you have successfully installed the recovery files.You can now install any compatible .zip ROM or app.

• Lets Root It

 1. Download this file- Superuser

 2. Next place this file in your micro-SD card- any location (doesn't matter)

 3. Go into Recovery Mode -  ( " Volume Down"+"Power" )

 4. install Superuser zip file with the option "install .zip from SD" from the recovery menu.

There you go- Your HTC Explorer Is rooted and is all yours....

Recommended: Install "Link2sd" for moving your apps to SD card. This will help you to move apps to partitioned SD card

Read more »

How To Root Samsung Galaxy S III I9300 Android 4.1.2 XXELKC Stock Firmware

 

 

 

 The Galaxy S III is the successor to Samsung's best-selling Galaxy S II. It has a bigger, 4.8" 720p display. It also is the first device to have a quad-core Exynos 4412 processor, with each core clocked at a maximum 1.4 GHz. It packs NFC, wireless charging capability, and the latest wireless radios. It ships with Samsung's Nature UX interface, which is the latest version of TouchWiz to date. It's available in 16, 32, and 64GB configurations. It's also available in pebble blue or marble white. 

Warning:

•  You should be aware that  rooting an android device will make its warranty void.

• To Regain Warranty incase of any problems Unroot the device

Download these:

 

Odin 3.07 CF-Auto Root.zip

Let's Get Started: 

• Download the CF-Auto-Root zip. Extract the contents of the zip to a single folder that should be placed on your desktop screen.

• Download Odin 3.07 from . Extract the Odin zip contents to the same folder created at step 1.

• Power off your smartphone now and then boot it into Download Mode. This can be done by pressing ‘volume down’, ‘home’ and ‘power’ buttons simultaneously. Confirm that you want to boot the Download Mode.

• Go to the Odin folder and launch the executable. Odin will now boot and you then have to connect your Galaxy S3 to your computer.

• Odin will say ‘added!!’ and you can click on the PDA button. Find the ‘CF-Auto-Root .tar.md5′ file and load it into Odin.

• Don’t change any default settings of Odin and when you’re ready you should click the Start button.

• Wait until the root is complete and that will happen when your SGS3 will reboot.

• Odin will say ‘PASS’ and when the phone shows the boot animation logo you can unplug it from PC.

• These are all the steps that you had to take and now you should use the Root Checker app from Google Play Store. Use this app to confirm that the root files have been pushed to your phone.

 There you have It! Galaxy S3 Rooted

Read more »

How To Root Samsung Galaxy Grand Duos GT-i9082

Features

• Android v4.1 (Jelly Bean) OS
• 5-inch Capacitive Touchscreen
• 8 MP Primary Camera and 2 MP Secondary Camera
• Full HD Recording
• Expandable Storage Capacity of 64 GB
• Multi Window
• Dual Standby SIM (GSM + GSM)
• 1.2 GHz Dual Core Processor

Lets See how to root this big screened monster.!

Warning: 

Rooting void warranty of your phone. Please backup all your data before doing this. Be careful with each steps. Please note that it is quite easy to do too.

Downloads: 

1. CWM-touch_i9802_Chotu.tar

2. Update_SuperSu 

3. Uninstaller zip

Lets Begin:

 

Step1

• Download and setup ADB drivers for your device 

Step2

• Download the recovery-Recovery
• Download odin 3
• Turn of your device and go to odin mode [ Vol down + power + home button (all at the same time) ] release it when you see GT-i9082 logo
• Press vol up to confirm 

 Step 3

•  Now that you are in odin mode connect your device via usb cable ! 
• Now open Odin3 3.04 that you have downloaded !
• If there is a pop-up like Installing ADB drivers let it get finished it is usually updates   

 

•  Make sure the COM : xx (xx is usb port number it can be any number so dont worry about it,just verify COM is lit up)
• Extract the CWM-touch_i9082_chotu.tar.zip ! Now select PDA and browse to where you have extracteded CWM-touch_i9082_chotu.tar.md5 and select it

• Click Start

Now you have successfully created a CWM touch Recovery 

Note: 

 "If any one is getting md5 hash value failed while flashing rename "CWM-touch_i9082_chotu.tar.md5 to ""CWM-touch_i9082_chotu.tar" (remove the .md5) and then flash it !"

How To Root:

• Download SuperSu 
• Copy that to externel sdcard (NOT INTERNAL ! )
• Power off your device and press vol up + power + home button (all at once)
• Select install zip from sdcard --->choose zip from sdcard ---> scroll down and select UPDATE-SuperSU-v1.05.zip  

Done ! And you are ready to go 

How To Unroot:

 

Download The Uninstaller File given above.

If you want to unroot keeping CWM alive then flash only the Uninstall_root_SGG.zip (like you flashed SuperSu.zip earlier)

There its simple!

Thanks xda! 

Read more »

How To Overclock LG Optimus L3 E400 Cyanogenmod 9

LG Optimus L3 E400 is a great affordable budget android device. We have seen how to root this great device and even saw how to install CM9 Custom ROM on L3.

This device has a great 832Mhz CPU and Adreno 200 GPU. This kernel update is for those who have installed CM9 in their LG l3 E400. This kernel update will allow you to overclock the cpu to a maximum 1.1GHz clock speed. It also stabilizes the Adreno GPU. It also supports zram, swap, USB fix, Camera Fix etc.

Warning:

• Please Read the steps carefully and execute them exactly as said here.
• The device for installation Must Be Rooted - Check This : Root LG L3 E400
• You must have Cyanogenmod 9 installed- Check this: Install CM9 in LG L3 E400
• We aren't Responsiblie for any damage occurred to your device. Do at your own risk
• This method is tested and working fine in CM9 L3

Downloads:

Overclock_ Kernel

How To Install:

• Download the above kernel.zip file

• Copy the zip file to your SD card.

• Next you have to reboot your phone

• Enter CWM recovery mode

•  select "install zip from sd card" and select the kernel file. ( No need to wipe anything; cache, dalvik...etc)

• Reboot your device and Its done!

Install any CPU overclock  app from the playstore, and you are ready to overclock your LG L3 E400.
I prefer SetCPU/No Frills CPU. You can choose any you like.

Note: Don't jump the clock setting by a large margin, move the slider bit by bit and check whether its stable. It has few problem like restarting when clocked above 1 GHz.

Read more »

How To Install JellyBean On Galaxy y + Updates

Samsung Galaxy Y is a cute little budget android phone which has caught the hearts of young people in India and over the world. The device comes with android 2.3 Gingerbread, which is far outdated in present scenario, with Jellybean overtaking GB earlier this year in terms of users. Those who have used Y for a long time must have been bored by the old GB interface. So we can show you how to install JellyBean ROM in your favorite Galaxy Y. 

Before starting Check: How To Root And Install CWM Recvovery :Galaxy Y

Warning:

• Create back-up of all your data
• Phone should possess atleast 65% battery life left
• We aren't responsible for any problems with your device, Do this at your own risk.
• Rooting Voids Warranty

Install Jellybean:

• Before Starting Root Your device and Install CWM Recovery- Click here

• Download the JellyBlast Rom from 4share by searching " JellyBlastGenEDSigned.zip" ( about 122 MB)

• Using USB connect your phone to Pc and copy the downloaded Rom file to your SD card.

• Disconnect device from PC.

• Boot into Recovery Mode-( Press Home+Volume Up+Power buttons)

• Now you can use home button to select and Volume buttons to navigate.

• Next you have to wipe all of the given stuffs:  [ wipe format, wipe system, wipe data, wipe boot, wipe dalvick, wipe cache ]

• Next select "install zip from SD card" and in the coming page select "choose zip from SD card".

• Now select the downloaded "JellyBlast.zip" rom file from your SD card and confirm it.

• Now you have to wait till the process is finished. It will take some time.

• When Jellybean is successfully installed, you will get a confirmation. Next go to main menu and select" Reboot System Now", and wait for it to restart.

• Please note that the first boot takes quite some time, be patient.

Note: If your device hangs on boot screen/welcome screen, no need to worry. Just do all these steps again after removing the battery and reloading it.

There you go! Your Galaxy Y is now f

Read more »

Silv3rwind Jailbreak for iOS 6.1.3 is a fake!

Whenever Apple releases a new iOS firmware version, a fake jailbreak tool sprouts up on some corner of the internet. And this time iOS 6.1.3 has been the 'victim' of a so-called silv3rwind tool that claims to jailbreak iOS 6.1.3 firmware. The evad3rs dev team has also tweeted that this tool is fake and all users should stay away from it because it could be a potential virus that might infect your computer.

How this scam works 

I was successfully abe to reverse-engineer the entire scam just to make sure you know how it functions. 

• The creator of this fake software either programs the tool himself in a windows-based programming language like Visual Studio or outsources the coding part. 

• The scammer then packages the executable .exe file in a zip file and makes it password protected. 

• Now, he makes another text file in the which gives the instructions to the user to complete a survey to get the password for the software.
• User complete the survey and scammer earns money.

Stay away from such scams and fake tools. I am watching a lot of gullible people asking us the password of silv3rwind's zip file. iOS 6.1.3 firmware can't be jailbroken at the moment successfully but you can downgrade iOS 6.1.3 to 6.1.2 and then use evasi0n.

Read more »

How To Untethered Jailbreak ios 6.1.3

How To Untethered Jailbreak ios 6.1.3
Hello,Untethered Jailbreak For All ios 6 , Even For iOS 6.1.3 Has Been Release From The New Jailbreak Tool " UNJA1L " You Can Download The Tool Form The Official Website www.UnJa1l.com
No Password Required For The Tool.You Just Download It And You Can Make An Untethered Jailbreak To ios 6.1.3 Or Lower.
It Works For:

iPhone 5 / iPhone 4S / iPhone 4 / iPhone 3GS
iPad 1 / 2 / 3 / 4G & iPad Mini
iPod Touch

At The Video You Have A Step By Step How To Use This New Tool.

Read more »

How to Jailbreak iOS 6.1.3, 6.1 Final on the iPhone, iPad & iPod Touch with Redsn0w

With the release of iOS 6.1.3 Apple brought out some cool new features. But you know what's cooler? Jailbreaking! Presenting the easiest guide on how to jailbreak your iPhone, iPad, iPod Touch. http://InsanelyiOS.com

This is the Official jailbreak for iOS 6.1 iPhone 4, 3GS, iPod Touch 4g

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Website- http://InsanelyiOS.com
Subscribe- http://j.mp/Sub-SikmeniOS
Follow us- http://twitter.com/InsanelyiOS
Stalk us- http://j.mp/FB-InsanelyiOS
Circle us- http://gplus.to/SikmenTech
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

VIDEOS-
DFU Guide- http://j.mp/xDM1yh
Restore Mode Guide- http://j.mp/wlQ5R1

MORE-
Upgrade to iOS 6.1 FREE- http://j.mp/W9RyxX
Fix Waiting for Reboot Error- http://j.mp/IFYm0d

DOWNLOADS-
Firmware- http://j.mp/W9SnqC
redsn0w- http://goo.gl/pT0VQ

 

Read more »

How to Jailbreak iOS 6.1.3 & Install Cydia with Redsn0w- iPhone, iPad & iPod Touch

Redsn0w has been updated with iOS 6.1.3 support for the iPhone, iPad & iPod Touch that brings various bug fixes and improvements over the original iOS 6 firmware. For More on jailbreaking visit- http://InsanelyiOS.com

This is the Official jailbreak for iOS 6.1

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Website- http://InsanelyiOS.com
Subscribe- http://j.mp/Sub-SikmeniOS
Follow us- http://twitter.com/InsanelyiOS
Stalk us- http://j.mp/FB-InsanelyiOS
Circle us- http://gplus.to/SikmenTech
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

VIDEOS-
DFU Guide- http://j.mp/xDM1yh
Restore Mode Guide- http://j.mp/wlQ5R1

MORE-
Fix Waiting for Reboot Error- http://j.mp/IFYm0d

DOWNLOADS-
Firmware- http://j.mp/UmF5B6
redsn0w- http://goo.gl/BTSJL

 

Read more »

How To Root And Install ClockWorkMod Recovery: Samsung Galaxy Y GT-S5360

Samsung Galaxy Y is a great entry level android phone equipped with a good deal of stuffs. It has a 800 MHz CPU and possess 290 MB RAM. It runs on android 2.3.6 Gingerbread.It lacks a separate Graphics processor while HTC Explorer, LG L3 E400 has adreno 200 GPU for 3D performance.But it still is a good phone to consider, with the low price compared to other models in its range. If you wanna increase the performance or install a custom rom and enjoy your Y a little longer, you need to root it. 

This guide will help you to Root Galaxy Y GT-S5360

Warning:

Rooting can void warranty. Please be careful while executing these procedures.

• Make sure you have backed up all your personal data, it may get lost during rooting
• The phone should possess atleast 65% battery life.
• Rooting Voids Warranty, You can acquire warranty after Unrooting.
• CWM can only be done after Rooting!

Instructions: Must Read

Downloads:

Update.zip

Let's Root:

• Download The Update.zip file provided.
• Now using PC move this file to your Phone's SD card.
• Now Turn Off your device.
• Boot Into recovery Mode- { Press Home+Volume Up+Power Button]
• From the Menu Select "Update from SD card"
• Next choose the copied Update.zip file from SD card.
• Reboot using the reboot option in Recovery options menu.

Congrats! You have successfully Rooted Your Galaxy Y!

Install ClockWorkMod Recovery:

• First Root Your Phone
• Next Go to Google play-store to download ClockworkMod ROM manager app.
• Then you have to enable USB Debugging by ; Settings > Applications > Development > USB debugging
• After doing these steps correctly, Open ROM Manager App in your Ace
• Now click the “Flash ClockWorkMod Recovery“. This process will download the ROM from ClockWorkMod. Better have Internet connection ready in your device.
• After clicking, you will have to choose your phone model. Select your phone model from list and it will download the ROM. Then Reboot your phone.

There You go. You have successfully installed CWM Recovery!

Read more »

How To Update Samsung Galaxy Ace S5830i With JellyBean ROM

Samsung Galaxy Ace is a well accepted android phone all over the world, which was updated as Ace plus with enhanced features later on. It comes with Ginger bread 2.3. It possesses 832 Mhz CPU and 5MP camera. Since its configuration doesn't suite JellyBean, no official updates are available for Ace 5830i. You can upgrade your phone to Android 4.1.1 Jelly Bean Operating System by installing this custom ROM. the Rom is called JellyBlast.

Warning: 

Create backup of all data. Rooting Voids warranty. Perform each step carefully. We are not responsible for any damage to phone. You have to root your device and have CWM recovery installed for doing this Update.Also maintain atleast 65-70% battery on your device. Disable all antivirus and firewalls too.

Before Starting Root Your Ace- How To Root Galaxy Ace S5830i

How To Install ClockworkMod Recovery (CWM)

• First Root Your Phone
• Next Go to Google play-store to download ClockworkMod ROM manager app.
• Then you have to enable USB Debugging by ; Settings > Applications > Development > USB debugging
• After doing these steps correctly, Open ROM Manager App in your Ace
• Now click the “Flash ClockWorkMod Recovery“. This process will download the ROM from ClockWorkMod. Better have Internet connection ready in your device.
• After clicking, you will have to choose your phone model. Select your phone model from list and it will download the ROM. Then Reboot your phone.

"With that you have installed CWM recovery On Ace S5830i"

Read more »

NEW Jailbreak 6.1.2 Untethered iOS iPhone 5,4S,4,3Gs,iPod Touch 5,4 & iPad Mini,4,3,2

Shortly after Apple released iOS 6.1.2 earlier today, the evad3rs released evasi0n v1.4 to Jailbreak the new firmware. The latest version of evasi0n can now successfully Jailbreak all iOS 6 firmwares, including 6.0, 6.0.1, 6.0.2, 6.1, 6.1.1 and, now, iOS 6.1.2! Like with older versions of evasi0n, 1.4 includes support for all iDevices – the list is as follows: the iPhone 5, iPhone 4S, iPhone 3GS, iPad mini, iPad 4, iPad 3, iPad 2, iPod touch 5^th generation and the iPod touch 4^th generation.
First, before proceeding, you will need the following:

• One of the iDevices listed above running any firmware from iOS 6 through 6.1.2 that hasn’t been updated via Apple’s over the air (OTA) update feature. If you did restore using the feature or you wish to update to 6.1.2, simply back up your device using iTunes, restore to the latest iOS 6.1.2 firmware, continue with this tutorial to successfully Jailbreak and restore from your iTunes backup to retrieve all personal data.
• Evasi0n version 1.4 (available in the download section below)

Steps for Windows and Mac OS X users:
1. Open the evasi0n utility after downloading it and place the application in an easy-to-access location on your computer to simply the process – preferably your desktop.

• If your computer is powered by Windows Vista, Windows 7 or Windows 8, set the compatibility mode of evasi0n to Windows XP Service Pack 2 and run the tool as an administrator by right clicking.

2. Connect your iPhone, iPad or iPod touch to your computer via a standard Apple 30-pin or lightning USB cable and click the Jailbreak button.
3. Ensure that your iOS-based device remains connected to your computer throughout the entire Jailbreak process and refrain from touching your device’s physical buttons.
4. Unlock your iDevice when prompted – this step is explained in great detail in the video embedded above – and tap the Jailbreak icon only once.

• Note: If you have a security lock screen passcode set, you must first remove it before you can complete the Jailbreak.
• Note 2: While the first few automated steps can certainly take longer to complete than the Jailbreak demonstrated  in the embedded video, a simple restore can drastically reduce the amount of time required to Jailbreak and eliminate your chances of encountering issues.

Congratulations, once your device reboots, you will have an Untethered Jailbreak on iOS 6.1.2!
Untethered: Your iPhone, iPad or iPod touch is Untethered, meaning you won’t be required to connect to a computer and re-run the jailbreak utility every time you wish to reboot – simply power your device off and back on again.
Download Evasi0n:
Download Evasi0n version 1.4 for Mac
Download Evasi0n version 1.4 for Windows

Read more »

How To Dual Boot Windows 8 and Windows 7.

Hey Windows8TMHacks here!

Just showing you guys how to Dual boot Windows 8 & 7!

Commands when installing Windows 7:

1) Press shift & F10

2) Enter "diskpart"

3) Enter "select vdisk file=D:\VHD\Windows.vhd" (Or C:\VHD\Windows.vhd if you have only 1 partition)

4) Enter "attach vdisk"

5) Exit

That's all for this video!

Read more »

How To Remove Windows 8 RTM and Install Windows 7

Don't like Windows 8? Want to install Windows 7? Well, this guide will show you how!

If you PC came with Windows 8, your bootloader may be locked, which will disable installing other operating systems. You can check the BIOS for a setting which may allow you to disable the lock. Not all Windows 8 PC's support this.

If you PC came with Windows 7, check the sides (or underneath if its a laptop) for the product key. Make sure you use the correct version of Windows 7 too!

Read more »

How to Repair Bad Sectors

Windows 7 and Windows XP

Bad sectors are sections of your computer's hard drive that have been damaged, and have lost the ability to save and store your data. In most cases, bad sectors are the result of internal physical damage in your computer, such as magnetic disk failure, and can sometimes corrupt your saved data. Bad sectors are usually indicated by grinding or chugging noises inside of your computer or from error messages that inform you that data cannot be saved to your disk drive. To repair bad sectors on a Windows operating system, you can run your computer through an automatic error-check and repair process. If you have a Macintosh computer, you can re-install the affected sections of your operating system (OS) that contains the bad sectors, or you can choose to re-install the entire OS completely.   

1.Close any open files on the affected disk drive. In order for the repair process to work, you must close any programs, applications, and files saved or stored on the faulty disk drive.

2. Open your Start menu. The Start menu button is located in the bottom-left corner of your Windows desktop and may appear in the form of the Windows logo if you use Windows 7.
   
   
   
3. 3
   Select "Computer" from the Start menu. If you use Windows XP, this option may read as "My Computer."
   
   
   
4. 4
   Open the properties menu for the affected disk drive. The "Computer" folder will display a list of all your disk drives on the computer.
   
   
   
   • Right-click on the affected disk drive and choose "Properties" from the floating menu that appears. The properties menu will then appear on your screen.
     
     
     
5. 5
   Click on the "Tools" tab. This tab will allow you to access the error-check and repair option.
   
   
   
6. 6
   Click on the "Check now" button. You will then be presented with options for checking and repairing existing problems with your disk drive.
   
   
   
7. 7
   Select the option for repairing bad sectors.
   
   
   
   • Place a check mark within the box next to "Scan for and attempt recovery of bad sectors."
     
     
     
8. 8
   Repair the bad sectors.
   • Click on the "Start" button to repair the bad sectors on the affected disk drive. This procedure may take several minutes, depending on the size of the disk drive you are repairing. When the repair process has finished, Windows will notify you that the bad sectors have been repaired.
     
     
     

Macintosh OS X

1. 1
   Insert the Macintosh (Mac) installation disc into the disc drive. The Mac OS X installation disc was initially included with the contents of your computer.
2. 2
   Select the "Install Mac OS X" option from your desktop. After your computer reads the installation disc, the "Install" option will appear in the form of an icon.
3. 3
   Perform the installation process. An installation wizard will appear on your screen to walk you through each step of the process. You will be prompted to indicate the affected disk drive that contains the bad sectors, as well as the parts of the operating system you want re-installed.
   • Click "Install" after following the prompts within the installation wizard to re-install the affected parts of your Mac OS X system.

Read more »

How to upgrade Windows 7 to Windows 8

Windows 8 is out! In this tutorial we will upgrade our Windows 7 machine to Windows 8 in just a few simple steps!


Requirements:

In order to proceed you'll need a copy of Windows 8 and an existing installation of Windows 7.

Step 1. Insert the Windows 8 dvd and run it, a windows 8 window will appear.

Step 2. Check "Go online to instal updates now (recommended)" and hit "Next". The installer will now get the latest updates.

Step 3. Enter your product key and hit "Next", read the license terms, check "I accept the license terms" and hit "Accept". Choose which files you want to keep and hit "Next". After a few minutes the "Install" button appears, click "Install".

Step 4. Wait, a while. The installer will now upgrade your Windows 7 machine to Windows 8. This can take a very long time depending on your hardware.

Step 5. Enjoy! Your machine is now upgraded to Windows 8.

Read more »

Install Windows 8 from A USB Flash Drive ( How To )

install Windows 8 from A USB Flash Drive
Windows 7 USB tool
http://www.avoiderrors.net/Downloads/...

Windows 8 Developer Preview disk image AND PRODUCT KEY.
http://windows.microsoft.com/en-US/wi...

 

Read more »

How to Restore HP Laptop to Clean Windows Install without Disks

You can easily do a fresh Windows install on HP laptops and cut out the bloatware simply by using a built-in HP Recovery utility. This video demonstrates how to do a clean Windows OS install on an HP laptop. I recommend doing it on anyone that purchases a new HP notebook. Read all my reviews of HP laptops here: http://www.laptopreviews.com/hp

 

Read more »

How To Root Samsung Galaxy Camera

The Samsung Galaxy Camera is an interesting combination of a high-resolution 16 MP pocket camera and a fully functional Android-powered mobile device. On the Android side, it's powered by a quad-core Samsung Exynos 4412 running at 1.4 GHz. It has a 4.8" SC-LCD screen, packing a resolution of 1280x720. It comes with a full gig of RAM, and weighs in at a hefty 305 grams. On the camera side, the Galaxy Camera features a 16 MP BSI CMOS sensor. It also features a 28-48 mm (35mm equivalent) optical zoom lens.

Warning:

Rooting can void warranty. Be careful while doing these steps.If incorrectly done, it can brick your phone. Don't worry warranty can be secured if unrooted.

Also this cannot hurt your device because full recovery is simply a 1.1gig Odin flash away.

Note: This Autoroot  is based on GC100XXALK1.

 

Items Required :

 

• A windows computer (or heimdall built from source and the files included in the package)
• The Recovery+Cache which will flash upon installation. Get it here: http://download.chainfire.eu/283/CF-...d1-ekgc100.zip
• The Odin version used is Version 1.85. Get it here: https://rapidshare.com/files/2195283307/Odin3_v1.85.zip
• Use JellyBean 4.1.1 build:GC100XXALK1 in case of problems. Get it here: http://www.hotfile.com/dl/179234447/...B_THL.zip.html

Let's Root:

• unzip the CF-Auto-Root-gd1-ekgc100.tar.md5 from the zip package to a place you can find it.

• Launch the Odin3 application
• 
• place CF-Auto-Root-gd1-ekgc100.tar.md5 in the "PDA" section

• Put your device into Download Mode:
  Remove and replace the battery.
  Press "Volume down+Camera+Power".

• Connect your device to your machine

• click start

 

Conclusion:

By default, this device does not show a Warning Triangle. In the future it may. Go back to stock by using the 1.1G recovery package above after using TriangleAway by Chainfire

Read more »