How To Root HTC Explorer A310E( Pico )?




HTC Explorer is a great budget android phone. Equipped with a lot of candy features, not to mention the Sense 3.5 UI. If you want to select your first android touch phone and budget tight then,need not consider any other but the explorer itself. Superb first android phone.It is powered by a 600MHz processor ,Adreno 200 GPU, 3.2MP camera (no flash) and many more. So this cute little phone has a little bad side-a low 90MB linternal memory. it has some pre-installed apps that cannot be removed. How to remove them?
Rooting is the only way. Let's see how to root it. Its fast and simple-yet effective.

Warning:

Rooting makes your warranty void. This is simple guidelines created by experts. Mistake might be present. please be kind enough to report. Wrong doings can brick your phone!!!

Rooting:

Follow these steps carefully---
  • First thing you have to do is install HTC sync on your PC 
It can be downloaded from HTC site. This will help to communicate between PC and Device
  • Next you have to unlock your phone's bootloader 
 ( Go to htcdev.com. From Bootloader section select your device. But HTC explorer isnt listed on the site. No need to worry. Just select "All Supported Models", and follow the steps.)
  • Now 'ADD A RECOVERY' - 
That will allow you to install .zip ROMs. You can access to it in the menu android phones have when booting the phone after removing-inserting the battery and pressing "volume down" and "power" buttons simultaneously. (Other phones have different button combinations).
1.  Download  this recovery file - HTCa310eRecovery.zip
2.  Extract all the files to any place on your PC like E:/explorer
3.  Run the recovery.bat with phone in fastboot mode (first option in the "3 android menu" ) and connected with USB.

If you have done all this correctly then you have successfully installed the recovery files.You can now install any compatible .zip ROM or app.
  • Lets Root It
 1. Download this file- Superuser
 2. Next place this file in your micro-SD card- any location (doesn't matter)
 3. Go into Recovery Mode -  ( " Volume Down"+"Power" )
 4. install Superuser zip file with the option "install .zip from SD" from the recovery menu.
There you go- Your HTC Explorer Is rooted and is all yours....

Recommended: Install "Link2sd" for moving your apps to SD card. This will help you to move apps to partitioned SD card

How To Root Samsung Galaxy S III I9300 Android 4.1.2 XXELKC Stock Firmware

 

 

 

 The Galaxy S III is the successor to Samsung's best-selling Galaxy S II. It has a bigger, 4.8" 720p display. It also is the first device to have a quad-core Exynos 4412 processor, with each core clocked at a maximum 1.4 GHz. It packs NFC, wireless charging capability, and the latest wireless radios. It ships with Samsung's Nature UX interface, which is the latest version of TouchWiz to date. It's available in 16, 32, and 64GB configurations. It's also available in pebble blue or marble white. 

Warning:

  •  You should be aware that  rooting an android device will make its warranty void.
  • To Regain Warranty incase of any problems Unroot the device

Download these:

 

Odin 3.07
CF-Auto Root.zip

Let's Get Started: 


  • Download the CF-Auto-Root zip. Extract the contents of the zip to a single folder that should be placed on your desktop screen.
  • Download Odin 3.07 from . Extract the Odin zip contents to the same folder created at step 1.
  • Power off your smartphone now and then boot it into Download Mode. This can be done by pressing ‘volume down’, ‘home’ and ‘power’ buttons simultaneously. Confirm that you want to boot the Download Mode.
  • Go to the Odin folder and launch the executable. Odin will now boot and you then have to connect your Galaxy S3 to your computer.
  • Odin will say ‘added!!’ and you can click on the PDA button. Find the ‘CF-Auto-Root .tar.md5′ file and load it into Odin.
  • Don’t change any default settings of Odin and when you’re ready you should click the Start button.
  • Wait until the root is complete and that will happen when your SGS3 will reboot.
  • Odin will say ‘PASS’ and when the phone shows the boot animation logo you can unplug it from PC.
  • These are all the steps that you had to take and now you should use the Root Checker app from Google Play Store. Use this app to confirm that the root files have been pushed to your phone.

 There you have It! Galaxy S3 Rooted

How To Root Samsung Galaxy Grand Duos GT-i9082



Features


  • Android v4.1 (Jelly Bean) OS
  • 5-inch Capacitive Touchscreen
  • 8 MP Primary Camera and 2 MP Secondary Camera
  • Full HD Recording
  • Expandable Storage Capacity of 64 GB
  • Multi Window
  • Dual Standby SIM (GSM + GSM)
  • 1.2 GHz Dual Core Processor

Lets See how to root this big screened monster.!

Warning: 

Rooting void warranty of your phone. Please backup all your data before doing this. Be careful with each steps. Please note that it is quite easy to do too.

Downloads: 

Lets Begin:

 

Step1

  • Download and setup ADB drivers for your device 

Step2

  • Download the recovery-Recovery
  • Download odin 3
  • Turn of your device and go to odin mode [ Vol down + power + home button (all at the same time) ] release it when you see GT-i9082 logo
  • Press vol up to confirm 

 Step 3
  •  Now that you are in odin mode connect your device via usb cable ! 
  • Now open Odin3 3.04 that you have downloaded !
  • If there is a pop-up like Installing ADB drivers let it get finished it is usually updates   
 
  •  Make sure the COM : xx (xx is usb port number it can be any number so dont worry about it,just verify COM is lit up)
  • Extract the CWM-touch_i9082_chotu.tar.zip ! Now select PDA and browse to where you have extracteded CWM-touch_i9082_chotu.tar.md5 and select it





  • Click Start
Now you have successfully created a CWM touch Recovery 
Note: 
 "If any one is getting md5 hash value failed while flashing rename "CWM-touch_i9082_chotu.tar.md5 to ""CWM-touch_i9082_chotu.tar" (remove the .md5) and then flash it !"

How To Root:

  • Download SuperSu 
  • Copy that to externel sdcard (NOT INTERNAL ! )
  • Power off your device and press vol up + power + home button (all at once)
  • Select install zip from sdcard --->choose zip from sdcard ---> scroll down and select UPDATE-SuperSU-v1.05.zip  
Done ! And you are ready to go 

How To Unroot:

 

Download The Uninstaller File given above.

If you want to unroot keeping CWM alive then flash only the Uninstall_root_SGG.zip (like you flashed SuperSu.zip earlier)
There its simple!
Thanks xda! 

How To Overclock LG Optimus L3 E400 Cyanogenmod 9




LG Optimus L3 E400 is a great affordable budget android device. We have seen how to root this great device and even saw how to install CM9 Custom ROM on L3.

This device has a great 832Mhz CPU and Adreno 200 GPU. This kernel update is for those who have installed CM9 in their LG l3 E400. This kernel update will allow you to overclock the cpu to a maximum 1.1GHz clock speed. It also stabilizes the Adreno GPU. It also supports zram, swap, USB fix, Camera Fix etc.

Warning:

  • Please Read the steps carefully and execute them exactly as said here.
  • The device for installation Must Be Rooted - Check This : Root LG L3 E400
  • You must have Cyanogenmod 9 installed- Check this: Install CM9 in LG L3 E400
  • We aren't Responsiblie for any damage occurred to your device. Do at your own risk
  • This method is tested and working fine in CM9 L3

Downloads:

Overclock_ Kernel

How To Install:

  • Download the above kernel.zip file

  • Copy the zip file to your SD card.
  • Next you have to reboot your phone

  • Enter CWM recovery mode

  •  select "install zip from sd card" and select the kernel file. ( No need to wipe anything; cache, dalvik...etc)

  • Reboot your device and Its done!


Install any CPU overclock  app from the playstore, and you are ready to overclock your LG L3 E400.
I prefer SetCPU/No Frills CPU. You can choose any you like.

Note: Don't jump the clock setting by a large margin, move the slider bit by bit and check whether its stable. It has few problem like restarting when clocked above 1 GHz.

How To Install JellyBean On Galaxy y + Updates


Samsung Galaxy Y is a cute little budget android phone which has caught the hearts of young people in India and over the world. The device comes with android 2.3 Gingerbread, which is far outdated in present scenario, with Jellybean overtaking GB earlier this year in terms of users. Those who have used Y for a long time must have been bored by the old GB interface. So we can show you how to install JellyBean ROM in your favorite Galaxy Y. 



Warning:

  • Create back-up of all your data
  • Phone should possess atleast 65% battery life left
  • We aren't responsible for any problems with your device, Do this at your own risk.
  • Rooting Voids Warranty


Install Jellybean:

  • Before Starting Root Your device and Install CWM Recovery- Click here

  • Download the JellyBlast Rom from 4share by searching " JellyBlastGenEDSigned.zip" ( about 122 MB)

  • Using USB connect your phone to Pc and copy the downloaded Rom file to your SD card.

  • Disconnect device from PC.


  • Boot into Recovery Mode-( Press Home+Volume Up+Power buttons)

  • Now you can use home button to select and Volume buttons to navigate.

  • Next you have to wipe all of the given stuffs:  [ wipe format, wipe system, wipe data, wipe boot, wipe dalvick, wipe cache ]

  • Next select "install zip from SD card" and in the coming page select "choose zip from SD card".

  • Now select the downloaded "JellyBlast.zip" rom file from your SD card and confirm it.

  • Now you have to wait till the process is finished. It will take some time.

  • When Jellybean is successfully installed, you will get a confirmation. Next go to main menu and select" Reboot System Now", and wait for it to restart.

  • Please note that the first boot takes quite some time, be patient.

Note: If your device hangs on boot screen/welcome screen, no need to worry. Just do all these steps again after removing the battery and reloading it.





There you go! Your Galaxy Y is now f

Silv3rwind Jailbreak for iOS 6.1.3 is a fake!


Whenever Apple releases a new iOS firmware version, a fake jailbreak tool sprouts up on some corner of the internet. And this time iOS 6.1.3 has been the 'victim' of a so-called silv3rwind tool that claims to jailbreak iOS 6.1.3 firmware. The evad3rs dev team has also tweeted that this tool is fake and all users should stay away from it because it could be a potential virus that might infect your computer.




How this scam works 


I was successfully abe to reverse-engineer the entire scam just to make sure you know how it functions. 

  • The creator of this fake software either programs the tool himself in a windows-based programming language like Visual Studio or outsources the coding part. 
  • The scammer then packages the executable .exe file in a zip file and makes it password protected. 
  • Now, he makes another text file in the which gives the instructions to the user to complete a survey to get the password for the software.
  • User complete the survey and scammer earns money.

Stay away from such scams and fake tools. I am watching a lot of gullible people asking us the password of silv3rwind's zip file. iOS 6.1.3 firmware can't be jailbroken at the moment successfully but you can downgrade iOS 6.1.3 to 6.1.2 and then use evasi0n.

How To Untethered Jailbreak ios 6.1.3

How To Untethered Jailbreak ios 6.1.3
Hello,Untethered Jailbreak For All ios 6 , Even For iOS 6.1.3 Has Been Release From The New Jailbreak Tool " UNJA1L " You Can Download The Tool Form The Official Website www.UnJa1l.com
No Password Required For The Tool.You Just Download It And You Can Make An Untethered Jailbreak To ios 6.1.3 Or Lower.
It Works For:

iPhone 5 / iPhone 4S / iPhone 4 / iPhone 3GS
iPad 1 / 2 / 3 / 4G & iPad Mini
iPod Touch

At The Video You Have A Step By Step How To Use This New Tool.

Powered by Blogger.